Step 1: Clean
PRODUCTS YOU'LL NEED
Then download your application sheet for clear step-by-step instructions on how to apply.
Kemseal Tape
Tape your gaps with either Reinforcing Tape or Peel & Stick Tape to ensure a smooth application of the Kemseal Primer and Sealer coats can take place.
Kemseal Primer
This Kemseal Water Based Epoxy (WBE) is a Silicone Membrane Primer that provides excellent adhesion to most prepared substrates. It is ideal for tanking, waterproofing and priming.
APPLICATION
This is a step by step guide to your gutter waterproofing project. If you'd like further help please feel free to Contact Us with the details of your project for any advice and guidance.
✓ Rinse off roof surface with a water blaster and ensure you have a clean, dry surface before starting.
✓ Bridge sealing edges, laps, vents & joints in the roof with Kemseal Reinforcing Tape or Kemseal Peel & Stick Tape.
✓ Stir up both the Kemseal WBE Part A and Part B individually for a couple of minutes, until each of them is thoroughly mixed.
✓ Mix together the Kemseal WBE Part A and the Kemseal WBE Part B until well combined.
✓ Apply 1 Layer of Kemseal WBE to the whole area. Leave it to dry for approx. 1 hour, or until dry to touch.
Coverage:
1L Part A & Part B mixed does 6 - 8m2.
Apply the Kemseal S-80 on top of the Kemseal WBE primer within 2 days at the latest, to ensure the primer doesn't get too hard.
Apply the first Layer of Kemseal S-80 using a brush or roller. Leave it to dry for approx. 3-12 hours depending on weather conditions.
Coverage:
Apply a minimum thickness of 1L per 2m2.
A 15L bucket will coat 30m2 total.
Wait until the first coat can be walked on without causing damage before applying the second coat.
✓ Apply the second Layer of Kemseal S-80 after the first coat is dry.
